1
Mark out desired location of basin and drill hole for basin
waste with a hole saw.
Note:
If cutting a stone benchtop it will need to be cut in a
controlled environment by a licensed tradesperson as per
OH&S regulations.
2
Install pop up waste and attach to plumbing. Test by running
water through the waste and pushing the plug down.
3
Silicone basin to vanity benchtop as required.
INSTALLATION GUIDE
This product must be installed by a licensed plumber. This is a general installation guide - there are
many factors involved that can alter the installation method.
AU/NZ: For installations within Australia and New Zealand, this product must be installed in com
pliance with AS/NZS 3500.
UK: For installations in the United Kingdom this product must be installed in compliance with the
Water Supply (Water Fittings) Regulations and Water Supply (Water Fittings) (Scotland) Byelaws.
Other: For installations outside these countries, this product must be installed in compliance with
the standards in your respective countr y.
DO NOT use cream
cleaners or bleach.
These substances are
abrasive.
Regularly clean with
mild liquid detergent
or soap and water.
DO NOT use cleaning
pads with abrasive
sur faces as this may
scratch the material.
