Please read fully and understand Setup Guide prior to operating the TR3!
ABI
(Absolute Innovations, Inc.)
-‐ 855-‐211-‐0598 -‐
www.abiattachments.com
Page
11
of
17
ATTACHING AND USING OPTIONAL PARTS –
RAIL BLADE ATTACHMENT:
1.
The Rail Blade attaches to the right side or left side of the Leveling
Blade. To attach the Rail Blade remove the 2 bolts from the 45
degree wing and remove the wing from the Leveling Blade. Then
align the Rail blade to the Leveling Blade over the Leveling Blade
section on the outside. Using the same 2 bolts removed from the
wing, and attach and secure the Rail Blade.
2.
The Rail blade will not come directly in contact with the ground
when the TR3 is in the normal drag position. The Rail Blade was
designed this way so that it could be attached to the TR3 while
dragging the rest of the Arena, without disturbing the footing as it
is groomed.
RAIL BUSTER ATTACHMENT AND USE:
1.
To attach the Rail Buster to the TR3 remove one of the stabilizing wheels on the TR3
and insert the Rail Buster in place of the stabilizing wheel.
2.
The Rail Buster depth can be adjusted by adjusting where the scarifier is pinned on
the Scarifier tube. Adjust the scarifier to the same depth as the scarifiers on the TR3.
3.
The Rail Buster can be used in conjunction with the Rail Blade or separately.
Hydraulic Top Link Option:
Some Tractors may need an extender with the optional Hydraulic Top Link to get maximum
range of movement with the Hydraulic Top Link.
1. Attach the hydraulic top link to the Tractor replacing the manual top link.
For tractors with enclosed mounting areas the hydraulic top link may need
to be mounted with the body of the hydraulic top link attached to the TR3
with the shaft attached to the Tractor. If the hydraulic top link must be
mounted with the body of the hydraulic top link on the TR3, ensure the
hoses will be long enough to reach the tractor when the hydraulic top link
is fully extended before operating the TR3.
2. Hook the hydraulic hoses of the hydraulic top link to the hydraulic fittings
on the tractor.
3. Extend out the hydraulic top link shaft so that it can be attached to the
TR3/Tractor and attach using a hitch pin to the TR3/Tractor. The hydraulic top link is now ready for use.
