Abexo ELIOX, Manual, Page: 12 / 15

Contact: closed
Contact: open
Contact: deactivated
(see Par. 9)
ERROR
OK: no error
STP: stop
OPN: OPEN command entered
FT1: photocell 1
FT2: photocell 2
OC1: obstacle current - motor 1
OC2: obstacle current - motor 2
OE1: obstacle - encoder motor 1
OE2: obstacle - encoder motor 2
DR1: overcurrent - motor 1
DR2: overcurrent - motor 2
ZC1: No current motor 1
ZC2: No current motor 2
VOW: tension - too low
Limit switch C1/Encoder 1
Limit switch A1/Encoder 2
Limit switch C2
Limit switch A2
Photocell 1
Photocell 2
Stop command
Start 1 command
Start 2 command
Q1: position motor 1
Q2: position motor 2
18.1 MENU “STATUS”
Press button >+ to change menu and go to the
following one
Press OK and select the chosen logic
Press OK and then press the button of the transmitter you want
to program (do not program a transmitter on solar automations!)
Press OK and select the time that the gate must remain open,
with AUTOMATIC or CONDOMINIUM logic.
Press OK and select the force of the gate
Press OK and enter the throttle programming procedure
(the kit are already programmed)
Press OK and enter the password (ask it by calling us or by email)
to enter the advanced menu (see par. 2)
Press OK to change the time (see par. 13)
Press OK to change the language