Abexo ELIOX, Manual, Page: 10 / 15

Solar charger check
Battery connection
CN3-BT CONTROL UNIT
D4
R18
P2
4 P 3 P P1
IC17
IC5
If the photocell is not perfectly centered or sees an obstacle
then the FT1 error appears on the display when you try to
carry out a closing maneuver.
Reflex photocell
Connect the battery to the 2 cables that come our of the box.
Connect the red cable to the red terminal [+]
Connect the black cable to the black terminal [-]
Wiring accessories
After connecting the reflex photocell to the
control unit, the polarized mirror must be instal-
led on the opposite side from the barrier.
To check that the mirror is positioned correctly,
use the procedure in par. 5.6.
Check that in the second line of the control unit
display, the FT1 input marker is high ^ when there
are no obstacles and becomes low _ when there
are obstacles in front of the photocell.