background image

5 Years (From Date of Purchase):

Abestorm warrants the dehumidifier will operate free of defects in workmanship and 

materials.At its discretion, Abestorm will repair or replace any malfunctioning components, 

free of charge excluding transportation costs)

Customer Responsibilities:

In order to take advantage of the warranty service, the customer must do the following:

1. Customer must mail in warranty registration card to Abestorm. If no card is submitted, warranty

period will begin the day the shipment left the warehouse. Please be sure to record serial # and date

of installation in the spaces provided on page 2 of the manual. You will need this information to receive

an RA number.

2. If warranty service is necessary, customer must contact Abestorm Tech Support by phone

44(20) 81243974 to receive a Return Authorization (RA number).

3. Once an RA has been issued, it is the customer’s job to bring the unit to a certified repair center.

If this is not an option, shipping will be arranged to bring the unit back to the Unipdry warehouse (at 

the expense of the customer).

4. After the unit has been received by Unipdry (whether at a repair center or the warehouse), an initial

inspection will be completed, if it is determined to be an invalid warranty claim (see exclusions below),

unit will only be completed after receiving payment from customer for all associated costs.

5. If unit is defective, the necessary parts will be repaired or replaced and the unit will be available

for pickup at certified repair center or returned via freight shipment (at customer’s expense). Keep in

mind that work is only done during normal working hours. After being repaired, all units are required to

go through a rigorous testing process prior to being returned to customer.

6. Once a part is repaired and the dehumidifier is returned, the original warranty period still applies

(no extensions)

Warranty Procedure:

Limited Warranty

Abestorm

'

s

Unipdry

Abestorm

Warranty Exclusions

13

14

Summary of Contents for Living Environment Series









Reviews: