Maintenance
**
For more detailed instructions, visit www.unipdry.com**
WARNING:
Unplug
the
device
before doing
any maintenance
.
Cleaning the Machine Body
• Use a soft, damp cloth to clean the exterior of unit. Do not use any
soap or solvents
Coil Maintenance
Once per year, clean the coils with an approved coil cleaner. The
coil cleaner should be a self-rinsing,
foaming, cleaner, such as
WEB® Coil Cleaner.
Cleaning the Filter
1. Unplug the unit.
2. For PreFilter:
a. Remove prefilter from inlet of machine.
b. Vacuum or wash with warm water (no soap).
3. For MERV-10/HEPA/Carbon Filters:
a. Replace as necessary- we recommend checking the filters
at least 1x/year
Electrical Access
•
• Remove the screw on the
control board cover.
Unscrew the 13 screws on the side panel.
Dehumidifier Storage
If
the
unit
has
been
in
store
for
a
longer
duration,
you
will
need
to
go
through
the
following
steps
before
using
it.
1.
.
2.
3.
4.
.
5.
Switch
off
the
unit
and
give
it
some
time
to
dry
Complete
the
first
three
steps
in
the
pump
and
reservoir
cleaning.
Ensure
the
power
chord
is
well
wrapped
and
secured.
The
filter
mesh
should
also
be
covered
It
should
be
stored
in
a
dry
and
clean
space.
Unit Diagram
• Be sure to secure the ducting with tie wrap.
• Maximum total length of duct run = 10’
• Inlet and outlet duct adapters are optional accessories
Ducted Applications
Ducting the dehumidifier allows the unit to be in one room while
conditioning an adjacent room. Both the inlet/return grille and the supply
grille are designed for 10” flex ducting
Duct Adapter Installation
• Screw in the 4 screws on each duct
adapter.
Flex Duct Installation
• Slide ducting over adapter
and secure with tie wrap or
clamps
Handle
Control Panel
Pre-Filter
Side Panel
Filter Cover
Discharge Grille
Auxiliary Terminals
Drain Hose
Connection
Power Cord
9
10
