P a g e
|
4
ABEM WALKTEM 2 ABRIGDED USER MANUAL
D. Connect TX loop and RX coils to WalkTEM 2 TX & RX units:
−
the RC-5 / RC-200 connect to Inputs A and B, on the RX unit; it is good practice to put the RC-5 into Input
A and the RC-200 into Input B;
−
a 3m lead-in cable connects the TL-1k6 to the TX unit; the black connector attaches to the cable drum,
and the red connector attaches to the loose end of the loop. It is only possible to connect it one way
round as the loop end of the 3m lead-in cable has one male and one female connector;
−
see Section 3 “Damping Resistor Decisions” for instructions on manually choosing a damping resisto
r if
you intend to use an external resistor rather than one from the internal array.
Summary of Contents for WalkTEM 2
Page 19: ...P a g e 19 ABEM WALKTEM 2 ABRIGDED USER MANUAL ...
Page 20: ......
