Step 1: Attach rear foot
(without wheels) to rear of
curved track. Remove the 2
bolts which have been pre-
attached to the rear foot,
then re-attach the bolts to
connect foot to track. Finger
tighten bolts only. Do not
tighten bolts with tool until
unit is fully assembled.
Step 2: Attach front foot
(with wheels) to front post
using the 2 pre-attached
bolts. Finger tighten only.
ASSEMBLY INSTRUCTIONS
IMPORTANT: Remove all parts from packing and inspect for
damage. Retain packing materials if possible.
CAUTION: Do not cut and remove the plastic strap with this label
attached until unit is completely assembed. The strap keeps the
SEAT secure to the CURVED TRACK for easy assembly.
FRONT POST
CURVED
TRACK
ARMREST
CONSOLE
SEAT
REAR
FOOT
Your Ab Coaster® Pro has been thoroughly inspected and partly assembled
before shipment. You will need to take a few additional steps as described
below to complete assembly. If you have any questions, please call our
customer service center at 973-287-5180.
Step 1: Attach Rear Foot
Step 2: Attach Front Foot
Step 3: Attach Front Post
Step 4: Attach Armrest Console
Step 5: Connect Wires
4
FRONT
FOOT
Summary of Contents for Pro
Page 2: ......