background image

WARNING!

To reduce the risk of fire,

electric shock, or injury:

IMPORTANT

SAFETY INSTRUCTIONS!

when using an electrical appliance, basic precautions

should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS UNIT

•  Close supervision is necessary when any appliance is used by or near children. Do not 

 

allow your Surevac Powerhead to be used as a toy or to run unsupervised at any time.

•  Unplug the cord when not in use. Do not run appliance over cord. Keep cord away from 

 

heated surfaces. Do not use with damaged cord or plug.

•  Do not leave appliance when plugged in. Unplug cord from outlet when not attended and 

 

before servicing.

•  If the Powerhead is in disrepair, do not, attempt to operate it. If appliance is not 

 

working as it should, has been dropped, damaged, left outdoors or dropped into water, 

 

return it to a service centre for check-up or repair.

•  Do not put any objects into openings. Do not use with any openings blocked. Keep free 

 

of dust, lint, hair, or anything that may reduce airflow.

•  The Powerhead contains a powerful revolving brush. Keep hair, jewelry, loose clothing, 

 

fingers, feet and all parts of body away from openings, rotating agitator and other 

 

moving parts.

•  Use extra care when cleaning on stairs.

•  Do not use the powerhead on people or animals.

•  Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot 

 

ashes; Do not use to pick up flammable or combustible liquids, such as gasoline, or use 

 

in areas where they may be present.

•  Never use Powerhead to pick up water or any other fluids. This could impair the 

 

electrical safety of the appliance.

•  Do not use if damaged, cut or punctured.

•  Avoid picking up hard or sharp objects, they could cause a blockage and damage the 

 

Surevac Powerhead.

•  Do not allow the powerhead to get wet. Clean only with a dry or slightly damp cloth.

 

If any moisture gets into the appliance, danger of electric shock.

•  Do not use the powerhead to suck up water; Do not immerse in water for cleaning.

•  Always turn off this appliance before connecting or disconnecting either the hose of 

 

motorized nozzle.

SAVE THESE INSTRUCTIONS

1

Summary of Contents for SureVAC 207422










Reviews: