![background image](http://html1.mh-extra.com/html/abc/lateral-file/lateral-file_manual_3327765020.webp)
Step 14
Page 20
å
Insert the DRAWER SIDES (D547 and D548) at
an angle into the slot at each end of the LOWER
DRAWER FRONT (E).
å
Slide the DRAWER BOTTOM (D729) into the
grooves in the DRAWER SIDES (D547 and D548)
and LOWER DRAWER FRONT (E).
å
Push one HIDDEN CAM (1F) into the
DRAWER BRACE (M63).
å
Fasten the DRAWER BRACE (M63) to the LOWER
DRAWER FRONT (E). Tighten one HIDDEN CAM.
å
Fasten the DRAWER BACK (D61) to the DRAWER
SIDES (D547 and D548) and DRAWER BRACE (M63).
Use five BLACK 1-9/16" FLAT HEAD SCREWS (30S).
å
Repeat this step for the UPPER DRAWER FRONT (D).
Surface with
HIDDEN CAM
1
2
3
4
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Groove
E
E
E
D548
D547
D548
D729
D547
D547
D548
D61
Unfinished
surface
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
30S
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(10 used in this step)
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
M63
M63
Hidden part using
recycled material.
Color may vary.
1F
Arrow
M63