manualshive.com logo in svg

ABC Office ROYAL 110CX, Owner'S Manual

Share
Download
ABC Office ROYAL 110CX Owner'S Manual Download Page 121

 

9 

1.  Turn the control key to the "open" position, open the printer cover as described on Page 10 and move the control 
switch to the "R1 or "R2" position. 
 
2.  Remove the battery cover, located at the back of the printer mechanism.  (Figure B). 
 
3.  Position the batteries as indicated (Figure C) making sure that the positive and negative poles are aligned correctly. 
 

4.  Replace the battery cover by sliding down in position.  (See Figure D). 

 

5.  Close the printer cover. 

 

 

 

 

 

 

THE BACK-UP BATTERY SYSTEM

 

__________________________________________________________________ 

 
During cash register operations, all transaction data for the management report is stored in the register's memory.  The memory 
also holds all the optional program information.  The memory back-up system keeps this information stored in memory when the 
cash register is turned off. 
 
The memory is protected by four standard "AA" (1.5-Volt) batteries that must be installed before programming the register. 
 
This register comes with 4 "AA" batteries which, when properly installed, provide back-up power to the register memory if the 
power cord is accidentally disconnected or if a power interruption occurs.  The daily transactions and locked in grand total will be 
retained by the machine without (AC) power because of the memory protection feature.  Average battery life protection is 
approximately 30 days after power interruption.

 

 

 

TO INSTALL OR REPLACE BATTERIES:

 

 
 

 
 
 
 
 
 
 
 
 
NOTE:  It is important that the unit is plugged in before the batteries are installed. 

 
NOTE:  In order to assure continuous battery back-up protection, it is important that the batteries be changed at least once every 
year. 
 
 

 
 
 
 
 
 
 
 

 

 
 

 

abcoffice

www.abcoffice.com                  1-800-658-8788

Summary of Contents for ROYAL 110CX

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands