Abbriata M100 MAGNUM, Use And Maintenance Handbook, Page: 25 / 27

Use and maintenance handbook – ed_07/04/2016
Round baler – M100 / M120 / M150
25
EN
GL
IS
H
END OF SEASON STORAGE
After eliminating all the harvest residues and disconnecting the binding system, and removing the twine or net, please do the
following:
a) Thoroughly clean the interior and exterior of the machine. Dirt and humidity may create rust.
Important! Warning! Clean the machine by using a high pressure air unit. Don’t use a high pressure water unit which
could damage machine parts.
b) Loosen the V-belts.
c) Check and remove the mobile parts such as belt tensioners, cardan shaft, etc. Clean and check them for wear. Replace
with new parts if necessary.
d) Oil all the parts of the cardan shaft.
e) Thoroughly lubricate the machine.
f) Clean the gears and change the oil.
g) Replace any worn or damaged parts.
h) Touch-up damaged paint and spray a rust inhibitor on bare spots.
i) Store the machine in a dry environment and inflate the tires.
j) Make a list of all the spare parts required and order them ahead of time (for your seller it will be easier to prepare the
spare parts during the off season). In this way your machine will be ready for use for the new season.
PREPARATION FOR THE NEW SEASON
a) Lubricate the entire machine.
b) Check the oil level. Top up, if necessary.
c) Adjust all screws and nuts.
d) Check all machine adjustments. Re-adjust, if necessary.
e) Carefully re-read the use and maintenance handbook.
CHARACTERISTICS
M100 / M120 / M150 is a “modular” range of fixed chamber round balers with chain and bars. They are differentiated by the
size of the bale produced, but all share the following advantages:
•
high level of sturdiness and construction quality
•
ease of use
•
reduced power absorption
•
low maintenance costs
•
compact dimensions and moderate weight
•
large production capacity due to the use of the latest generation packer device
•
possibility to reach a higher bale density than other machines of its category