Abbriata M100 MAGNUM, Use And Maintenance Handbook, Page: 10 / 27

Use and maintenance handbook – ed_07/04/2016
Round baler – M100 / M120 / M150
10
EN
GL
IS
H
WARNING!
•
Do not leave the machine unattended when there are moving parts.
•
Do not carry out any maintenance, lubrication, adjustment, cleaning, or any other operation when there are moving
parts.
•
All operations must be done with the machine stationary and with the tractor's engine switched off.
•
Do not use the machine without guards.
•
Whenever the operator has to get off the tractor, be has to disconnect the P.T.O., switch off the engine, pull on the
parking brake and wait for all the tools to stop completely before getting off. Getting back into the driver's seat, the
operator needs to make sure that earth or mud do not make the controls difficult for him
•
The machine can only be used if carried by a suitable tractor and controlled by a suitable cardan shaft, which takes its
motion from the tractors P.T.O.; all other uses are strictly forbidden.
•
Other persons in addition to the operator are not allowed on board the tractor.
•
It is not allowed to carry persons or objects on the equipment.
•
During normal work keep people out the range of action of the machine.
•
When working on slopes, keep to the tractor manufacturer's instructions to avoid turning over. In any case reduce your
speed and handle with care.
•
Before unhooking the equipment from the tractor, lean it on the ground and stabilize it with the stabilizer.
•
After unhooking, check the stability of the equipment.
•
Do not push the product into the collection apparatus using your hands or feet.
•
When transporting the machine it is necessary to use the customary signals.
•
The firm declines all responsibility should the above instructions not be observed.