5
Figure 3. Placing the pole mount on the pole
2.
Slide the pole mount onto the pole until the top of the pole
mount clamp is below the bottom edge of the black pole cap.
NOTE: The top of the pole mount clamp should be
approximately 1.2 cm to 5.1 cm (0.5 in to 2 in) below the
bottom edge of the pole cap.
Summary of Contents for IonicRF RF-POLE
