Abbott FreeStyle Navigator User Manual Download Page 190

Page: 190 / 196

State of Health
Event

A record of health-related events, symptoms, and other observations that may help you see

patterns in your glucose levels.

Statistical
Reports

A comprehensive summary of glucose results relative to your glucose targets. You can view

statistical reports for 1, 3, 7, 14, 21, or 28-day periods. Viewing this kind of information can

help you see patterns in your glucose levels.

Status
Information

Information about the system and how it is working, such as sensor time or battery life

remaining.

System

A short name for the FreeStyle Navigator Continuous Glucose Monitoring System.

System Alarms

System messages (For example, low battery life, time for calibration).

System Menu

A menu available from the Main menu that is used to access status information and other functions.

Transmitter (Tx)

Also called Tx. A small electronic device that makes an electrical connection to the portion of

the sensor that extends above the skin. The transmitter processes the very low current signals it

receives from the sensor and sends the glucose data to the receiver once every minute.

Transmitter/
Receiver
Connection

The wireless connection needed for the system to function. The transmitter and the receiver must

be within 10 feet of each other for the connection to be valid.

Transmitter
Sensor Support
Mount Latch

A connector that helps secure the transmitter to the sensor support mount.

Transmitter

Status

Allows you to view the transmitter serial ID number and battery life remaining.

Transmitter Tabs

Connectors that help secure the transmitter to the sensor support mount.

Unlink

The process of removing the transmitter ID from the receiver. Once unlinked, the receiver will no

longer be paired with a specific transmitter. Before beginning to use the system, the receiver and

transmitter have to be linked.

UP/DOWN Arrow
Buttons

Buttons on the right face of the receiver that allow you to move through lists to highlight options.

Also used to change numbers.

20 Glossary

(con’t)

END OF Section 20

Customer Care: 1-866-597-5520

180

Section 20

Glossary

Summary of Contents for FreeStyle Navigator





































































































































































































Search results

Summary of Contents for FreeStyle Navigator

Reviews:

Related manuals for FreeStyle Navigator

Brands by name

Popular brands

Abbott FreeStyle Navigator, User Manual

Search results

Summary of Contents for FreeStyle Navigator

Reviews:

Related manuals for FreeStyle Navigator

Brands by name

Popular brands