background image

Call Customer Care Toll Free at 1-888-522-5226   www.AbbottDiabetesCare.com

EN

G

LI

SH

EN

G

LI

SH

Using Your Meter’s Lights

Depending on what mode your meter is in, pressing the light button  

(   ) lights either the display backlight or the test light.

Using the Display Backlight

Pressing the light button powers on the display 

backlight in all modes except when applying a 

sample (for example, clock, memory, and set).
The display backlight goes out when you press 

the light button (   ) again or when the meter is 

inactive for 10 seconds.

Using the Test Light

Pressing the light button while the Blood Drop and 

Test Strip symbols appear on the display screen 

powers on the test light. The test light goes out:

When you press the light button again.

When the meter receives the correct amount of blood for a test (the 

test strip is filled).

After 60 seconds of no activity.

When a test strip is removed from the meter.

If you use either the backlight or the test light during the test mode, 

the backlight lights again to show you the test results after the 

measurement is complete.

LO and HI Readings

Important

: Low or high blood glucose readings can indicate a potentially 

serious medical condition. The FreeStyle Flash® Meter displays results 

from 20 to 500 mg/dL.

If your test result is lower than 20 mg/dL, LO will appear on the meter 

display screen. This reading indicates severe hypoglycemia (low blood 

glucose).

LO Reading 

with

 

Symptoms

If

 you have a LO reading and have symptoms 

such as weakness, sweating, nervousness, 

headache or confusion, 

then

 follow your doctor’s 

recommendation to treat hypoglycemia.

LO Reading 

without

 

Symptoms

If

 you get a LO reading, but have no symptoms of low blood glucose, 

then

 retest with a new test strip on your fingers or palm. If you still 

get a LO reading, follow your doctor’s recommendation to treat 

hypoglycemia. 
If your test is above 500 mg/dL, HI will appear on the display screen. 

This indicates severe hyperglycemia (high blood glucose).

HI Reading

 

with

 

Symptoms

If

 you feel symptoms such as fatigue, thirst, excess 

urination, or blurry vision, 

then

 follow your 

doctor’s recommendation to treat hyperglycemia.

HI Reading

 

without

 

Symptoms

If

 you get a HI reading, but have no symptoms of high blood glucose, 

then

 retest with a new test strip. If you still get a HI reading, follow 

your doctor’s recommendation to treat hyperglycemia.

LO Reading

HI Reading

Summary of Contents for FreeStyle Flash























Reviews: