manualshive.com logo in svg

Abbott FreeGo, Training Manual, Page: 20 / 28

Share
Download
Abbott FreeGo Training Manual Download Page 20

17

ALARMS/ALERTS: DOSE AND BATTERY

•

 

 

BATT 

LOW BATTERY 

means that the pump’s 

internal battery needs 

recharging (approximately 

20 minutes of battery 

operation remain)

•

  

Connect to mains power 

and continue feeding

•

  

If CHRG PLEASE WAIT 

is displayed, please wait 

until PUMP READY 

TO USE is displayed

•

  

A fully charged battery will 

power the pump for about 

24 hours at a feed rate of 

125ml/h. The battery charges 

fully in about 6 hours

•

 

 

BATT 

BATT EMPTY means 

that the battery is depleted 

and the pump has stopped 

feeding

•

  

Connect to mains power

•

  

The display will indicate  

CHRG PLEASE WAIT until 

the pump is ready to use

DOSE DONE

BATTERY

•

 

 

DOSE 

DONE means that the dose you entered in SET 

DOSE is finished. This is normal

•

 

 If you wish to feed until the container is empty, set 

the dose to INF DOSE by selecting SET DOSE and 

depressing the Down arrow until INF DOSE is displayed

•

  

If dose is set to INF DOSE this alarm will not alert

Summary of Contents for FreeGo





























Reviews:

No comments