CELL-DYN
®
3200 System Operator’s Manual
5-55
9140181H—October 2001
Section 5
Operating Instructions
2.
AUTO-PRINT RESULTS FOR ALERTED SPECIMENS
When this option is enabled, results for flagged specimens are automatically
printed as tickets are inserted in the printer. Flagged results are marked with
an asterisk (*).
3.
AUTO-PRINT RESULTS FOR NON-ALERTED SPECIMENS
When this option is enabled, results for specimens that are not flagged are
automatically printed as tickets are inserted in the printer.
4.
PRINT PCT, PDW RESULTS
When this option is enabled, the PCT and PDW are printed on the ticket.
NOTE:
Clinical significance has not been established for these parameters.
Therefore, they are not reportable.
To Customize the Pre-Printed Ticket
1. Go to the Ticket Printer - Pre-printed Ticket section of the
CUSTOMIZE
PRINTED REPORT
screen
(refer to Figure 5.25).
2. Use the arrow keys on the keyboard to move the cursor to the desired option.
3. Press
[TOGGLE ON/OFF]
to enable or disable the selected option.
4. Repeat steps 2 and 3 until all selections have been made.
5. If desired, press the Print Screen key on the keyboard to obtain a printout of
the selections.
6. Press
[SET UP]
to return to the
SET UP MENU
screen.
Customize Displayed Report
Customized displays can be established for each of the four parameter sets. The
CUSTOMIZE DISPLAYED REPORT
screen (see Figure 5.26) for the indicated
parameter set (in this case PARAM SET 1) and the following soft key labels are
displayed when the
[CUSTOMIZE DISPLAY]
key in the
CUSTOMIZE PRINTED
REPORT
screen is pressed:
PARAM SET 1*
PARAM SET 2*
PARAM SET 3*
PARAM SET 4*
CUSTOMIZE PRINTOUT
CUSTOMIZE HEADER/
CANCEL GRAPH
(The key label alternates between the selections.)
SELECT GRAPH/
PLACE GRAPH
(The key label alternates between the selections.)
SET UP
*The soft key for the displayed parameter set is blanked out.