ABBINA domino grill, Instruction Manual, Page: 10 / 24

GB
10 11
Instructions for the installation technician
Installation
These Instructions are for the qualified technician, as a
guide to the installation, adjustment and maintenance,
according to the laws and standards in force. Any of
these operations must always be carried out when the
appliance has been disconnected from the electric
system.
Positioning (Fig. 5)
The appliance can be fitted into a working area as
illustrated on the figure. Apply the seal supplied over
the whole perimeter of the working area.
Electrical connection (Fig. 6)
Prior to carrying out the electrical connection, please
ensure that:
- the plant characteristics are such as to follow what is
indicated on the matrix plate placed at the bottom of
the working area;
- that the plant is fitted with an efficient earth connection,
following the standards and law provisions in force.
The earth connection is compulsory in terms of the law.
Should there be no cable and/or plug on the equipment,
use suitable absorption material for the working
temperature as well, as indicated on the matrix plate.
Under no circumstance must the cable reach a
temperature above 50°C of the ambient temperature.
If connecting directly to the mains power supply, fit a
multi-pole switch of a suitable size for the rated capacity
with a clearance disconnects the power line under
overvoltage category III conditions, consistently with
the rules of installation (the yellow/green earth wir must
not be interrupted). distance which completely The
plug or omnipolar switch must be easily reached on the
installed equipment.
The manufacturers decline any responsibility in the
event of non-compliance with what is described above
and the accident prevention norms not being respected
and followed.
To avoid all risk, if the power cable becomes damaged,
it must only be replaced by the manufacturer, by
an authorised service centre, or by a qualified
electrician.