Do not instal within 10 feet of a pool, spa or fountain
CAUTION:
fixture(s) must be installed in accordance with all local codes and ordinances.
INSTALLATION INSTRUCTION
To ensure optimal performance and safety, it
is important to use our fixtures ONLY with a
low voltage landscape transformer. This
transformer reduces the voltage from 120V to
12V, making it safe and suitable for outdoor
use.
When installing the fixture(s), please follow
these instructions carefully:
1. Please ensure the light cable wires input are
12v ac/dc.
2. Before installation, please ensure that the
power is turned off for your safety.
3. Using a suitable main cable connector for
direct burial, attach the fixture(s) wires. We
recommend using WN12 waterproof wire nuts
(sold separately) for optimal connectivity.
4. Remove the lens from the fixture.
5. Insert the bulb with the correct wattage.
6. Place the lens back onto the fixture.
7.For a secure and stable mounting, dig a small
hole and insert the spike into the ground,
ensuring it is vertical and firm.
8. Adjust the light angle.
9. Turn on the power.
We strongly recommend that the main cable
from the transformer be buried underground
for safety reasons. Additionally, please be sure
to avoid exceeding the maximum wattage on
the fixture(s) to prevent any damage or
hazards.
www.ABBALightingUSA.com
FIXTURE
LENS
BULB
FIXTURE
LENS
5.
6.
7.
