S T A N D A R D S , R E G U L A T I O N S , N O T E S , F U R T H E R D O C U M E N T S
5
—
Standards, regulations, notes, further
documents
The relevant standards for switchgear over 1 kV and their switching devices
Switchgear
Switchgear
Circuit breaker
Disconnector and earthing
switch
Switch disconnector – fuse
combination
HRC - fuses
IEC
62271-1
62271-200
62271-100
62271-102
62271-105
60282
GB
GB/T 2011
GB 3906
GB 1984
GB 1985
Common specifications for high-voltage
switchgear and
controlgear standards
High-voltage switchgear and controlgear, Part 200: A.C.
metal-enclosed switchgear and controlgear for rated voltages
above 1 kV and up to and including 52 kV
High-voltage switchgear and controlgear
Part 100: High voltage alternating current circuit breakers
High-voltage switchgear and controlgear
Part 102: Alternating current disconnectors and earthing switches
High-voltage switchgear and controlgear
Part 105: Alternating current switch-fuse combinations
High-voltage fuses - Part 1: Current-limiting fuses
Take particular account of the relevant standards listed below. Observe the national technical specifications and the accident
prevention regulations of the country in which the switchgear is operated and the safety data sheets for the used auxiliary
materials.
IEC 60364
IEC 61936
DIN EN 50110
National technical accident prevention regulations e.g. for electrical systems and equipment and SF
6
installations
Safety data sheets for auxiliary materials
Low-voltage electrical installations
Power installations exceeding 1 kV a.c.
Operation of electrical installations
Fundamental notes on this manual
Read the relevant sections of this manual through
in full before performing work, so as to ensure
correct handling.
Paragraphs in this manual are marked in
accordance with their significance. The markings
mean the following:
Hazard warning, meaning in this manual
that death or serious injury and
considerable damage may occur if the
actions described are not performed.
Important note, meaning in this manual
that injury and damage may occur if the
actions described are not performed.
Attention is drawn to further documents.
Note on safety
The internal arc classification to IEC 62271-200 |
GB 3906 confirms a tested degree of operator
protection. The information on accessibility of the
switchgear as required by IEC 62271-200 | GB
3906 can be found on the name plate of the
panels. The coding is as follows (example):
