13
Cell Temperature, Thermocouple or Preset Temperature
Select thermocouple for cell temperature measurement.
Cell Temperature Thermocouple Type
Select the thermocouple being used for cell temperature measurement:
Make a note of the thermocouple type and then reset it to Type K.
Store.
Cell T/C type K or
➞
R
S
Cell temp T/C or
➞
➞
set or
➞
▼
T/C or
▲
K or
➞
Enter
Store.
Enter
Select the Analogue Retransmission P
.
Advance to next parameter.
Advance to next parameter.
Continued from opposite page.
SECURE PARAMETERS (retransmissio
▲
Operate for approximately three seconds to gain access to the SECURE
PARAMETERS (retransmission 1)
within the Analogue Retransmission Page.
Advance to SECURE
PARAMETERS (retransmission
.
Twice
ANALOGUE RETRANSMISS
OP1 ReTx xxxxx or
➞
Vary Lo OP1 & ENT
➞
➞
Vary Hi OP1 & ENT
➞
➞
Retransmission Output 1
▼
▲
or
OP1 ReTx Cell T or
➞
Make a note of the parameter range assigned to retransmission output 1 and
then assign the cell temperature range.
Store.
Enter
Advance to next parameter.
Retransmission Ouput 1, Lower Retransmission
Make a note of the value on the upper display and then reset it to '0.0'.
Enter
▼
▲
or
Retransmission Ouput 1, Higher Retransmission
Make a note of the value on the upper display and then reset it to '1400'.
Continued overleaf.
▼
▲
or
Store.
Advance to next parameter.