Operation Manual / 4 Product description / A200-L
8 Disassembly and assembly / 8.13 Fitting the gas inlet casing (
≤
A275-
L)
© Copyright 2020 ABB. All rights reserved.
HZTL4036_EN
Rev.Q
July 2020
8.13
Fitting the gas inlet casing (
≤
A275-L)
Fig. 49: Fitting the gas outlet casing (A275-L and smaller)
Product
Size
Tightening torque [Nm]
A255-L
M16
30
1)
/ 140
A260-L
M16
30
1)
/ 140
A265-L
M16
30
1)
/ 140
A270-L
M18
40
1)
/ 200
A275-L
M22
50
1)
/ 380
Table 34: Tightening torque (51087)
1) Pre-tightening torque of the nuts
1. Coat threaded stud (51086) with high-temperature grease, screw in up to the stop in the
gas outlet casing (61001) and tighten hand-tight.
2. Loop around the gas inlet casing (51001) with the lifting gear and secure it to the crane.
3. Push gas inlet casing over the threaded studs up to the gas outlet casing.
4. Coat two nuts with high-temperature grease and fix gas inlet casing in two opposite po-
sitions.
Page
76
/
110