ABB-Welcome M
Mounting / Installation
|
— 59 —
Connect the bottom part of the device according to the graphics (see chapter
"
Connection
").
Setting
Set the address of the preferred outdoor stations and the address of the indoor station
on the rotary switches.
Set the master/slave function and the terminal resistor on the switches at the rear of the
top part of the housing (see chapter "
Terminal Resistor
").
Latch the device
Latch the upper part of the device onto its bottom part: place the upper side of the
device on the lock-in lugs and then press the bottom side onto the bottom part of the
device until it is caught by the clamp.
