ABB UniGear ZS3.2, Instruction Manual

Page: 44 / 48

44 UniGear ZS3.2 I N S T R U C T I O N M A N U A L
—
8 Product quality and environmental
protection
The UniGear type panels are in compliance
with the requirements of internationl
standards for the quality management system
and environmental management system. In
these fields, the excellent level is proved by
quality certificates according to ISO 9001 and
by the EMS according to ISO 14001.
End of life of product
The ABB company is committed to complying
with the relevant legal and other requirements
for environment protection according to the
ISO 14001 standard.
The duty of company is to facilitate subsequent
recycling or disposal at the end of product life.
During disposal of the product, it is always
necessary to act in accordance with local legal
requirements in force.
The following methods of disposal:
Disposal can either be carried out thermally in
an incineration plant or by storing on a waste
site.
Raw material
Metal material (Fe, Cu, Al, Ag, Zn, W, others)
Thermoplasts
Epoxy resin
Rubber
Oil as dielectric (transformer oil )
SF
6
gas
Packing material-wood
Packing material-foil
Recommended method disposal
Separation and recycling
Recycling or disposal
Separation of metal material and the disposal of rest
Disposal
Draining from equipment and further recycling or disposal
Discharging from equipment and further recycling or disposal
Recycling or disposal
Recycling or disposal