2TLC172125M0201 Rev.F
8
5
Connections
Connection cables
to mechanical contacts and power supply (Tina 3Aps only)
Brown
+24 VDC (Tina 3Aps only)
Blue
0 VDC (Tina 3Aps only)
Green
Safety loop A1-A2
Orange
Safety loop B1-B2
M12 5-pole male connector, A-coded
to DYNlink safety circuit
1 Brown
+24 VDC
2
White
DYNlink signal input
3 Blue
0 VDC
4 Black
DYNlink signal output
5 Grey
Information output
Note!
See connection cable cross section area and cable length in chapter
'Technical data/General'.
Caution!
All cable colors according to ABB standard cables.
Warning!
Information output signals shall
never
be used for safety purpose(s).
Warning!
The connection cables are not monitored and shall therefore be installed
within the same physical enclosure as the safety device to maintain the
highest safety level (fault exclusion, refer to EN ISO 13849-2:2012, Annex D).
Warning!
The safety loops shall
not
be used for purposes other than intended. All
tampering with safety loops can lead to serious risk to life.
Brown
Blue
Green (x2)
Orange (x2)
Tina 3Aps
only
M12 5-pole male connector