4
Transport, handling and unpacking
4.1
Transport the EVSE to the site
A transport company delivers the EVSE close to the site. The movement of the EVSE
to its final location is his responsibility.
If you need to store the EVSE before installation, obey the ambient conditionsfor
storage. Refer to section
.
Caution: YOU ARE PROHIBITED FROM TRANSPORTING OR HANDLING
THE EV CHARGER UNLESS YOU ARE AUTHORISED TO HANDLE THE
CHARGER AND YOU COMPLY WITH THE FOLLOWING SAFETY MEASURES!
Warning: Please follow these steps to comply with the applicable Safety
measures applicable to the working area including Instructions for safe
handling of the EV Charger
•
Check the weight on the transport document before moving the load. Make sure
that the offloading equipment used can handle this specific weight.
•
Check that the forklift truck or hoisting equipment for loading/unloading is
suitable and is able to move the EV Charger based on weight, and that the forks
of the forklift truck is fully able to move into the pallet to provide full support.
Fork lift operators must comply to all local regulations.
•
Handling personnel must wear all appropriate and applicable personal
protective equipment (PPE) and follow all the applicable Health and Safety
measures applicable to the working area.
•
Check the position of the center of gravity before lifting the EV Charger – the
higher the position of center of gravity, the more care is required to handle the
EV Charger to avoid overturning.
•
Check that the pallet is not damaged. Otherwise please contact the responsible
Health and Safety manager for the site to get instructed on how to unload the
EV Charger and move it in a safe way.
•
Check that the working place conditions are safe before handling the load
(such as obstacle-free unloading area, proper flooring, safe path and other
conditions).
•
Ensure that the area is not accessible to unauthorized personnel and the
personnel involved in handling the EV Charger are fully aware of the safety
measures to apply when handling the EV Charger and keep sufficient distance
away from moving EV Charger.
ABB is not liable for any damages resulting from the improper handling and
transportation of the Electrical Vehicle Charger, in particular resulting from non-
compliance with these instructions and other applicable regualtions and standards
(e.g. transport, occupational health and other safety standards).
4.1.1
Hoist the packaged cabinet
Preliminary requirements
•
The cabinet is packed.
•
Hoisting equipment
•
Installation engineer
Transport, handling and unpacking
9AKK108467A6398-EN | 002
53
