SREA-01 Quick Start-up Guide
2
SREA-01 Quick Start-up Guide
1. Connecting power and network
Connect 9–28 V AC/DC to Vin+ and Vin-.
Connect a cross-over Ethernet cable directly to the unit for start-
up. You can use a network after you have configured the unit.
2. Connecting to SREA-01 over Ethernet
The default Ethernet configuration is:
IP address: 10.200.1.1
Subnet mask: 255.255.255.0
Username: admin
Password: admin
Connection method 1:
Configure your PC to the same subnet (e.g. IP address 10.200.1.2
and subnet mask 255.255.255.0).
Use Internet Explorer or Mozilla Firefox and go to location
http://10.200.1.1
.
Connection method 2:
Install the ABB IP Configuration Tool from the attached CD. When
you start the program, it will search for connected SREA-01
modules. You can change the network settings of the module by
double clicking it.
Use Internet Explorer or Mozilla Firefox and go to location
http://<ip of the SREA-01 module>, e.g.
http://10.200.1.1
.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]
