ABB SmartRack MV, Manual, Page: 6 / 24

6
S M A RTR ACK ™ M V
R EM OT E R AC K I N G D E V I C E
Additional product support
For additional product support and details not
covered in the content of this instruction manual,
please contact your local sales representative.
The SmartRack™ MV remote racking device is able
to perform this complex task through the use of a
programmable logic controller and servomotor.
Throughout operation, the controller and motor are
in constant communication allowing the device to
accurately position a circuit breaker or other device
in the switchgear cell. The racking device
incorporates an actuator to operate the interlock
lever which eliminates need for an additional unit to
perform this task or for additional manual
interaction.
Overview
SmartRack™ MV remote racking device is intended
to assist technicians with the process of racking
medium voltage circuit breakers and associated
equipment. The main function of the device is to
perform the racking operation with minimal manual
interaction. This allows the operator of the device
to maintain a significant distance between
themselves and the circuit breaker while racking
is performed as compared to the traditional hand-
crank method of racking.circuit breaker while
racking is performed as compared to the
traditional hand-crank method of racking.
—
02
SmartRack™ MV
—
02
—
Introduction