5
S M A RT COM M U N I C ATI ON C A R D
M A N UA L
3.2.1. Mounting:
To mount the unit, place the upper edge of the DIN rail adapter on the upper edge of the DIN rail, holding the unit tilted
slightly upward, as shown in the illustration. Then tilt the unit down until the latch snaps onto the DIN rail.
3.2.2.
Mounting position:
The SCC should be mounted only in one position, i.e., front face facing forward like shown below:
To ensure sufficient convection in the mounting position, the minimum distance from other modules must not be less than
50 mm in the vertical direction and 30 mm in the horizontal direction. Details of the other mounting positions are available
on request.
3.2.3. Demounting:
To release the unit pull the latching lever downwards with a screwdriver and press the upper side of the latching lever down.
The device can be unhinged from the DIN rail and removed
Note: We encourage the user to use the clamps for mounting in the position in which the SMC should be mounted on the
panel.
3.3.
Architecture used
