background image

SM500F

Field mountable paperless recorder

7 Configuration

90

IM/SM500F Rev. Z

7.7.4 Archiving

Select the archive file format required – Text format or Binary format.

Note.

The selected archive file format is applied automatically to 

both

process groups. It is not possible to set each group to different
formats.

If 'Enable Batch Recording' on the 'Batch' tab is set to 'On', the
archive file format is set automatically to 'Binary format' and cannot
be changed.

Select the data types that are to be archived to the storage media:
Channel Data; Alarm Event log; Totalizer log; Audit log.

Note.

The totalizer log file can be enabled only if the totalizer option is
enabled.

Batch log files are generated automatically if batch recording is
enabled and cannot be de-selected.

File Type

Contents

Extension

Channel 
data files

Analog or digital recording channel signals in 
the current process group

 *.D00 (Text)

or

*.B00 (Binary)

Alarm 
event log 
files

The historical record of the alarm events 
related to the group's channels plus the 
history of any operator messages, electronic 
signatures or real time alarms.

 *.E00 (Text)

or

*.EE0 (Binary)

Totalizer 
log files

The historical record of all totalizer and 
associated statistical values relating to the 
group's recording channels.

 *.T00 (Text)

or

*.TE0 (Binary)

Audit log 
files

The historical entries in the audit log. 

 *.A00 (Text)

or

*.AE0 (Binary)

Note.

Displayed only if 'Archive file format' is set to 'Text format'.

Enter the filename (max. 20 characters) to be used to identify the channel
data archive files.

Note.

 The following characters cannot be used in the filename tag: \, /, :,

*, ?, ", <, >, |, superscript characters, ~, 

 and º. These are greyed-out

(color recorders) or blanked out when selected (monochrome recorders)
on the keyboard.

Summary of Contents for SM500F































































































































































































Reviews: