ABB | SACE Tmax XT
Protections | 7 - Protection Adaptive
67 | © 2019 ABB | 1SDH002039A1002 - ECN000093027 - Rev. A
7 - Protection Adaptive
The Adaptive Protection package is available by default for Ekip Hi-Touch, Ekip M Touch and Ekip G Hi-Touch
and configurable in the remaining models as additional SW package.
The protection is described below:
Dual Set
The function enables two different protection configurations to be made, one as an alternative to the other,
by means of a set change with programmable events.
The function can be activated in the
Settings
-
Dual Set
menu (page 33)
Parameter
Description
Default
Enable
Activates/deactivates the function
OFF
Default Set
Defines the sets of main and secondary protections (which activate in
the presence of the programmed event)
Set A
The event that determines set change (from default to secondary) can be programmed in the
Advanced
-
Functions
menu, see the paragraph Programmable Functions and Commands (page 76).