ABB SACE
SACE PR010/T
RH0029002
L2551
64/67
67
15.6.1.1 Local bus unit
From the CONFIGURATIONS menu it is possible to set the parameters for operation of the
release unit on the local bus, selecting:
At this point it is possible to choose one of the following items:
1. Presence
2. Release 1
3. Release 2
4. Release 3
5. Release 4
6. Release 6
7. Release 7
8. Release 8
Selecting "Presence" sets the presence/absence of a unit on the local bus.
Selecting Release x the configuration parameters of release x on the local bus unit are read/set, for
example selecting:
The setting of the activation signal of release no. 3 is displayed; pressing the ENTER key
launches editing mode (the cursor starts blinking); the setting of the activation signal is changed
using the keys
and
.
If "Custom" is selected, when ENTER is pressed the current setting is displayed, for example:
Key to be
pressed
Item selected
1
Operation mode
x
PR123/P
4
Config./Parameters
1
Configurations
9
Local bus unit
...
...
Key to be
pressed
Item selected
...
...
4
Release 3
1
Source
ALARM 1 4...6
→
L Pre-alarm
L Timing
→
S Timing
