ABB SACE Emax 2 E6.2, Instruction Handbook Manual

Page: 50 / 72

50 INSTRUCTION HANDBOOK
200
manually remove the operating mechanism.
Operating mechanism contains springs: their removal constitutes a potential hazard if not
performed in the proper way and using dedicated tools. Based on this ABB indication is not to
remove them from the operating mechanism and to manage the assembly with the maximum
level of attention during disassembly and dismantle phases.
Disassembled parts
• 4 + 12 + 2 + 3 + 2 screws (Metal)
• 1 setting plate (Metal)
• 1 upper cross beam (Metal)
• 3 blocks (Rubber)
• 1 mechanical release (Metal)
• 2 + 1 + 1 + 1 + 1 + 1 benzings (Metal)
• 1 + 1 + 1 pins (Metal)
• 1 nut (Metal)
• 1 + 1 levers (Metal)
• 1 spring (Metal)
• 1 springs charging lever (Plastic) SEPARATE
TREATMENT (Thermoplastics containing
brominated flame retardants)
• 1 operating mechanism (Plastic and Metal)
SEPARATE TREATMENT (Thermoplastics
containing brominated flame retardants