Page 9
© 2021 ABB. All rights reserved.
QUICK START GUIDE
Introduction
The repeater power system is an integrated pole mount solution that combines high efficiency rectifier, input AC
breaker and Surge Protection, up to six DC output breakers or fuses and DC surge protection in a pole/wall
mountable enclosure to simplify small cell / 5G Repeater deployments .
Basic Features:
•
The positive voltage is referenced to ground. The output is –
48V nominal. It is powered off of
120/240V
AC
~3W+PE with operational parameters as shown here: Input: 2.6A @ 120/240V
AC
~3W+PE, Output:
450W Maximum at 54V
DC
, depending on ambient temperature.
•
Isolated alarm contacts are available for DC Fault and AC Fault.
AC FIELD
WIRING
SECTION
DC FIELD
WIRING
SECTION
AC BREAKER
DC BREAKERS
(OR FUSES)
DC
AC CONDUIT
FOR INPUT
DC SPD
AC SPD
