GUID-0B43053E-C5DB-4B91-BFB7-2BEA7A988B6F V1 EN
Figure 14:
Creating a bay
GUID-D847EFFD-27AE-4530-9EF2-F64CA19553B7 V1 EN
Figure 15:
Creating a RIO600 IED
RIO600 is available only if the connectivity package has been
installed successfully.
2.
Rename each level in the structure by the names/identifications used in the grid.
2.1. Right-click the level and select
Rename
.
2.2. Rename the levels in the
Object Properties
view.
3.4
Inserting IEDs
IEDs can be inserted to the project either in offline or online mode.
When the physical device is not available or not connected to PCM600, the
engineering is done without any synchronization with the device. The offline
configuration in PCM600 can be synchronized with the physical device later by
connecting the device to PCM600. Working in the offline mode has an advantage
compared to online mode in that the preparation for the configuration can be
started even though the device is not available.
1MRS757489 A
Section 3
Setting up a project
RIO600
17
Configuration Manual
