ABB RET615, Product Manual

Page: 57 / 68

23. Tools
The IED is delivered as a pre-configured unit. The
default parameter setting values can be changed
from the front-panel user interface, the web-
browser based user interface (WebHMI) or the
PCM600 tool in combination with the IED-specific
connectivity package.
The Protection and Control IED Manager PCM600
is available in two different variants, that is
PCM600 Basic/Engineering and PCM600
Engineering Pro. Depending on the chosen
variant, PCM600 offers extensive IED
configuration functions such as IED signal
configuration, application configuration, graphical
display configuration including single line diagram
configuration, and IEC 61850 communication
configuration including horizontal GOOSE
communication.
When the web-browser based user interface is
used, the IED can be accessed either locally or
remotely using a web browser (IE 7.0 IE 8.0 or IE
9.0). For security reasons, the web-browser
based user interface is disabled by default. The
interface can be enabled with the PCM600 tool or
from the front panel user interface. The
functionality of the interface can be limited to read-
only access by means of PCM600.
The IED connectivity package is a collection of
software and specific IED information, which
enable system products and tools to connect and
interact with the IED. The connectivity packages
reduce the risk of errors in system integration,
minimizing device configuration and set-up times.
Further, the Connectivity Packages for the 615
series IEDs include a flexible update tool for
adding one additional local HMI language to the
IED. The update tool is activated using PCM600
and enables multiple updates of the additional
HMI language, thus offering flexible means for
possible future language updates.
Table 66. Tools
Configuration and setting tools Version
PCM600 2.4 SP1 or later
Web-browser based user interface IE 7.0, IE 8.0 or IE 9.0
RET615 Connectivity Package 4.0 or later
Transformer Protection and Control 1MRS756891 F
RET615
Product version: 4.0
ABB 57