Section 5
Connecting
5.1
Required tools
Only use a screwdriver and insert bits for Phillips (PH 1) cross-recessed head screws
(M3.5) when handling CT/VT terminals (X120) of screw-compression type.
A
B
A071178 V2 EN
Figure 21:
Screwdriver for CT/VT terminals of screw-compression type
A Max. ∅5.5 mm
B Max. ∅5 mm
A
A071180 V2 EN
Figure 22:
Insert bits for CT/VT terminals of screw-compression type
A Min. 15 mm
5.2
Connecting wires
All connections are made on the rear of the case. No soldering is needed.
•
Open the screw-compression type terminals before inserting any wires. By
default the terminals are closed at the time of delivery.
•
Use fine wire in door mounting.
1MRS757799 C
Section 5
Connecting
REC615 and RER615
33
Installation Manual
