Operation Manual / Power2 850-M / High-pressure stage
9 Disassembly and assembly / 9.5 Removing the wall insert
© Copyright 2022 ABB. All rights reserved.
HZTL4063_EN
Rev.F
March 2022
9.5
Removing the wall insert
Fig. 23: Removing wall insert 1
1. Remove three studs (72002) in the upper area.
2. Unplug cable connector (86515) and fix speed measurement cable in wall insert.
3. Use three press-off screws (90900) to press off the wall insert (77000) until the lifting
device can be fitted.
Fig. 24: Removing wall insert 2
4. Fit bracket (90030) with screws (90662) and nuts (90415).
5. Attach lifting gear to swivel lifting eye (90657).
6. Remove lock nut (72004).
7. Carefully move out wall insert (77000). When doing this, manually balance the wall insert
at the bracket.
Page
70
/
104
Summary of Contents for PT004165
Page 2: ......
