ABB ProcessMaster FEP611, Operating Instructions Manual

Page: 43 / 96

ProcessMaster FEP610, HygienicMaster FEH610 | OI/FEP610/FEH610-EN Rev. B 43
Parameter name
12.3456 [unit]
Next OK
3. Use
to select the decimal place to change.
4. Use / to set the desired value.
5. Use to select the next decimal place.
6. If necessary select and set additional decimal places in
accordance with steps 3 to 4.
7. Use to confirm your setting.
This concludes the procedure for changing a parameter value.
When an alphanumeric entry is made, a value is set by
entering the individual decimal positions.
Menu name
Parameter name
Currently set value
Next Edit
1. Select the parameters you want to set in the menu.
2. Use
to call up the parameter for editing. The decimal
place that is currently selected is highlighted.
Parameter name
ABC………
ABCDEFGHIJKLMOPQ
Next OK
3. Use
to select the decimal place to change.
4. Use / to set the desired value.
5. Use to select the next decimal place.
6. If necessary select and set additional decimal places in
accordance with steps 3 to 4.
7. Use to confirm your setting.
This concludes the procedure for changing a parameter value.
Exiting the setup
For some menu items, values must be entered. If you don't
want to change the parameter, you can exit the menu as
described below.
1. Pressing
(Next) repeatedly moves the cursor to the
right. Once the cursor reaches the end position, "Cancel"
is displayed in the lower right of the screen.
2. terminates editing and exits the menu item. Use to
return to the start.
NOTE
The LCD display automatically returns to the process display
three minutes after the last button has been actuated.
Change from two to one column