Operation 91
LED status indicators
The inverter has a LED on the control unit and 2 LEDs on the control board. To see
the control board LEDs, remove the control unit.
LED on control unit
The status LED on the control unit shows the status of the inverter. Refer to
and
.
Control board LEDs
You can see the control board LEDs through the window in the first cover when the
control unit is removed. The control board has 1 bi-color LED (1) and 1 red warning
symbol LED (2) which is on when there is a danger of electric shock.
LED status indications
Control board LEDs
Description
1. Status LED: red or green, OFF, ON or flashing.
2. Danger of electric shock: red, steady ON, if
inverter has diagnosed an active ground fault.
Status
Status LED
Sleep
OFF
Fault
ON red
Active fault that requires user action.
Warning
Flashing red (1 s ON, 2 s OFF)
Active warning. The warning does not prevent inverter power feed to the
grid, but the output power may be limited.
Stand-by
Flashing green (1 s ON, 2 s OFF)
The inverter is in stand-by mode.
Limited operation
Flashing green (3 s ON, 1 s OFF)
The inverter is in power feed mode with limited power output.
Normal operation
ON green
The inverter is in power feed mode.
1
2
Summary of Contents for PRO-33.0-TL Series
