23 | © 2022 ABB | - 1SDH002203A1002
ABB | E-kit
Web interface configuration
Once the device has been configured and one of the two Save Changes keys has been pressed, the focus
is populated with the information and channels relating to the typology selected, as illustrated in the figure
below
Use arrows < and > to browse among the pages of the channels available in the
Channels
section.
There are three types of channels available:
•
User
: information that can be edited by the user, not acquired by the device;
•
Modbus
: information acquired by the device;
•
Constant
: information defined in the model, not acquired by the device.
•
Logic
: values processed by logic defined in E-kit. Not used at the present time.
The rectangle containing the word
valid
illustrated in the next figure shows whether the corresponding
Modbus value has been acquired correctly:
•
Green: acquisition correct
•
Grey: acquisition not correct
To change a value in the
User
type channel, click on the corresponding value. This will access a window
where the required value can be entered. Click on
Update
to change the value, otherwise click on
Cancel
to quit without performing actions.
Summary of Contents for PM5630
