WARNING!:
THE OVRHS3/OVRHS3U SERIES WARRANTY IS VOIDED if
the unit is damaged as a result of improper installation or
the installer’s failure to verify the following conditions prior
to installation.
WARNING!:
HAZARDOUS VOLTAGES PRESENT: Improper installation
or misapplication may result in serious personal injury
or damage to the electrical system. Read the complete
installation instructions before proceeding with installation.
Remove all power to the electrical panel before installing or
servicing the SPD.
WARNING!:
IMPORTANT SAFETY INSTRUCTIONS: All work must be
performed by licensed and qualified personnel. Follow
applicable electrical specifications for the country the unit
is being used in.
WARNING!:
Check to ensure that a proper bond is installed between
neutral and ground at the transformer upstream from all
3-phase Wye, 3-phase High-Leg or 2-phase OVRHS3/
OVRHS3U series device. If the transformer is not
accessible, check the main service disconnect/panel for
the NG bond. Lack of a proper bond will damage OVRHS3/
OVRHS3U series and void the warranty.
WARNING!:
Do not HIPOT the OVRHS3/OVRHS3U series units or the
electrical system to which the OVRHS3/OVRHS3U series
unit is connected without disconnecting the OVRHS3/
OVRHS3U series units conductors including phases, neutral
and ground.
Warning!
lnstallation by person with electrotechnical expertise only.
Warnung!
lnstallation nur durch elektrotechnische Fachkraft.
Avertissement!
lnstallation uniquement par des personned qualifiées
électrotechnique.
iAdvertencia!
La instalación deberá ser realizada únicamente por
electricistas especializados.
Thank you for choosing the ABB
OVRHS3/OVRHS3U series Surge
Protective Device (SPD). We look forward
to fulfilling your facilitywide surge
protection needs.
This manual provides guidelines for the proper installation of
the OVRHS3/OVRHS3U series of devices. Proper product
selection and compliance with these guidelines will help your
new suppression system provide years of reliable service. If
installers are unsure about the facility electrical configuration
or have other installation-related questions, it is recommended
they consult with a qualified electrical professional.
When shortcuts are taken or installation procedures are not
followed, the OVRHS3/OVRHS3U series may become damaged
or may not provide adequate protection. It is extremely
important to follow these installation procedures carefully.
Guide to installation and assistance
OVRHS3/OVRHS3U surge protective devices
| Product manual 3
