manualshive.com logo in svg

ABB MTQ22-FBP.0, Manual

Share
Download
ABB MTQ22-FBP.0 Manual Download Page 17

— 

12   The configuration tool makes it possible to set the parameters in an easy way. Several MTQ22-FBP.0 devices can be created in the device tree (left). 

 

The final configuration can be saved to the disk and downloaded into the devices using a standard USB cable.

Parameters

Master Configuration and Supervision

The MTQ22-FBP.0 supports up to four parallel connections to Modbus TCP clients (i.e. PLCs). It is possible to monitor these 
clients for activity and signal a communication fault to the connected FBP devices after an adjustable timeout time.
For security reasons, the access to the MTQ22-FBP.0 can be limited to clients having IP addresses within a user defined 

range. Single addresses or address ranges can be defined.

Network Settings

Before any Ethernet communication takes place, the MTQ22-FBP.0 must have an IP address. It is possible to provide a static 
address or obtain the address via DHCP or the BootP protocol. 

 

In the case of a static IP address, the netmask and the gateway address must also be set manually.

Device Settings

Up to four FBP devices can be connected to the MTQ22-FBP.0. For each port, the connected device type (or NONE) must be 
specified. The MTQ22-FBP.0 then monitors the presence of the configured FBP device. 

Position Supervision

The MTQ22-FBP.0 detects accidental permutation of devices connected to it. Therefore, a specific address (1...254) has to be 
set per port which must match the address (1...254) set in the connected device. The MTQ22-FBP.0 offers status registers to 
read the actual FBP device supervision status via Modbus TCP. 

 

See the Address Map section for details.

Parameter Overview 

Before using the MTQ22-FBP.0 device, the following parameters must be set:

Parameter name

Default settings

DHCP / BOOTP

Manual

IP Address

192.168.171.254

Subnet Mask

255.255.255.0

Standard Gateway

192.168.171.1

Number of Modbus TCP masters under supervision

1

Allowed number of supervised connections missing

0

Allowed Modbus TCP IP Address for master 1 ... 4

0.0.0.0  ... 255.255.255.255 for master 1
0.0.0.0  ... 0.0.0.0 for master 2-4

Timeout for master 1 ... 4

10s

Device port 1 ... 4 used

UMC100

Device address for device 1 ... 4

1,2,3,4

17

U N I V ER S A L  M OTO R  CO N T R O L L ER  U M C 10 0. 3  | 

MTQ2 2- FB P.0  MODBUS  TCP  M A N UA L

Summary of Contents for MTQ22-FBP.0




































Reviews:

No comments

Brands by name

Popular brands

Load more brands