Type
Protocol
Master and slave
IEC 60870-5-104
Client
IEC 61850-8
Master
ANSI X3.28 - AB (ABB)
Master and slave
RP 570/571
Master and slave
DNP 3.0 (Subset 3)
Master and slave
Modbus
Client
OPC DA, A&E
Server
OPC DA, A&E
3.2
SYS 600C workplaces
3.2.1
Workplaces
SYS 600C can be equipped with 1 to 5 workplaces to be used at the same time. The
workplace provides means for the operator to configure the system and supervise and
interact with the process. Each SYS 600C computer can have a local workplace, but the
workplaces can also be distributed to other computers and locations.
The workstations can be distributed over a network using TCP/IP. It can be a LAN,
internet, or mobile wireless communication.
Each workplace can be used for engineering, supervision, and operation of the process.
The possibilities are defined by the access rights given to the user in question. Also the
layout and functions of the workplaces can be fully customized for each user.
The distributed workplace concept is based on available remote access techniques,
typically Remote Desktop Services. Any PC or other web-enabled device can be used
as a workstation without installing any additional software.
3.2.2
Process Display
One of the display types of the workplace is the process display. The process display is
used to represent the process and primary equipment, typically as a single-line diagram
with graphical symbols for primary devices, such as breakers, disconnectors, and
transformers. The process display is normally built with symbol libraries, but also
customized symbols and displays can be built.
The process display supports zooming, panning, and decluttering for efficient and clear
visualization of the information.
Through the process display the user can continuously monitor the process, such as
switches and measurements, as well as access the control dialogs to issue commands,
set parameters, and so on.
9
SYS 600C 2.93
MicroSCADA Pro
Product Guide
1MRS757729
16.11.2012
Issued:
A/16.11.2012
Version:
