24
L ST 3 0 0 |
CO M PAC T U LT R A S O N I C L E V EL T R A N SM I T T ER | L S T 3 0 0 – EN R E V. E
2
Press
or
to select the “Diagnostics” submenu .
3
Press
to confirm your selection
The first line indicates where the error has occurred .
The second line shows the unique error number .
The next lines show a brief description of the error and its
remedy information .
IMPORTANT (NOTE)
Refer to chapter 7 “Diagnostic Messages” for a detailed
description of the errors and remedy information .
Switching to the configuration level parameterization
The device parameters can be displayed and changed on the
configuration level .
1
Press
to switch to the information level .
2
Press
or
to select an access level .
3
Press
to confirm your selection
IMPORTANT (NOTE)
There are four access levels as follows:
• At the “Read Only” level all entries are disabled . Parameters
are read only and cannot be modified .
• At the “Standard” level you can edit all parameters except for
those written in italics .
• At the “Advanced” level all parameters can be modified .
• The Service menu is reserved to the customer service .
Passwords can be defined for the “Standard” and “Advanced”
levels . There are no factory default passwords .
Password can be edited or reset once you have logged on to the
corresponding access level . To reset to the “No password
defined” state, select “-” as the password .
4
Enter the corresponding password (see section “Selecting
and changing parameters”) .
Note
There is no factory default password . You can switch to the
configurationlevel without entering a password .
Note
The selected access level remains active for 3 minutes . Within
this time period, you can toggle between the process display
and the configuration levelwithout re-entering the password .
5
Press
to switch to the information level . The LCD display
now indicates the firstmenu item at the configuration level
6
Press
or
to select a menu .
7
Press
to confirm your selection
Selecting and changing parameters
Selecting a parameter value
1
Select the parameter you want to set in the menu .
2
Press
to see the list of available parameter values . The
parameter value that is currently set is highlighted .
Summary of Contents for LST300 Series
Page 26: ...26 LST300 COMPACT ULTR ASONIC LEVEL TR ANSMITTER LST300 EN REV E ...
Page 27: ...LST300 COMPACT ULTR ASONIC LEVEL TR ANSMITTER LST300 EN REV E 27 ...
Page 28: ...28 LST300 COMPACT ULTR ASONIC LEVEL TR ANSMITTER LST300 EN REV E ...
Page 59: ...LST300 COMPACT ULTR ASONIC LEVEL TR ANSMITTER LST300 EN REV E 59 Note ...
