manualshive.com logo in svg

ABB LEANtouch 6x36/30M-500 Series, Product Manual

Share
Download
ABB LEANtouch 6x36/30M-500 Series Product Manual Download Page 48

48

January 2005

ABB i-bus

®

 EIB

ABB Powernet EIB

LEANtouch (monochrome),
SMARTtouch (monochrome, colour)
Type: 6x36/30M(-500), 6x36/100x(-500), 6x36/100CB

Remote control via Bang & Olufsen
hand-held transmitter Beo4

The IR hand-held transmitter offers
the following options for controlling
the panel.

Button description Beo4:

 

Light:  

Changing of illumination

 

 

Record: Saving 

of 

lightscene

 

 

0 – 9: 

Light 1 up to 10

 

A: Lightscene 

1

 

C: Lightscene 

2

 

D: Lightscene 

3

 

F: Lightscene 

4

 

B: 

On or dimming brighter

 

E: 

Off or dimming darker

 

Stop:

All Off

Switching and dimming:

Press the “LIGHT” button on the
remote control. The text “LIGHT”
appears in the display of the remote
control. This mode is active for 25
seconds. If the display switches to
audio/video playback again, the
“LIGHT” button must be pressed
again.

Once the LIGHT mode is active, the
push buttons for triggering the
required function follow. See the table.

The format LIGHT + 1 + B means that
the three push buttons must be
pressed in sequence (not
simultaneously).

 
 
 
 
 
 
 
 
 
 
 

Function Push 

buttons

 

Light 1 on
Light 1 dimming brighter

LIGHT + 1 + B 
LIGHT + 1 + B, B long push

 

Light 1 off
Light 1 dimming darker

LIGHT + 1 + E 
LIGHT + 1 + E, E long push

 

Light 2 up to 9 analogue to
Light 1 

– 

Light 10 on
Light 10 dimming brighter

LIGHT + 0 + B 
LIGHT + 0 + B, B long push

 

Light 10 off
Light 10 dimming darker

LIGHT + 0 + E 
LIGHT + 0 + E, E long push

 

Retrieving and saving lightscenes

Press the “LIGHT” button on the
remote control. The text “LIGHT”
appears in the display of the remote
control. This mode is active for 25
seconds. If the display switches to
audio/video playback again, the
“LIGHT” button must be pressed
again.

Once the LIGHT mode is active, the
push buttons for triggering the
required function follow. See the table.

The format LIGHT + A means that the
two push buttons must be pressed in
sequence (not simultaneously).

 
 
 
 
 
 
 
 
 

Function Push 

buttons

 

Call Lightscene 1 

LIGHT + A 

Call Lightscene 2 

LIGHT + C 

Call Lightscene 3 

LIGHT + D 

Call Lightscene 4 

LIGHT + F 

Save Lightscene 1 

LIGHT + A 

Save Lightscene 2 

LIGHT + C 

Save Lightscene 3 

LIGHT + D 

Save Lightscene 4 

LIGHT + F 

ALL OFF

All the loads are switched off with one
push button action when the “STOP”
button is pressed.

Summary of Contents for LEANtouch 6x36/30M-500 Series












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands