12
January 2005
ABB i-bus
®
EIB
ABB Powernet EIB
LEANtouch (monochrome),
SMARTtouch (monochrome, colour)
Type: 6x36/30M(-500), 6x36/100x(-500), 6x36/100CB
Copying a panel
Only one panel can be parameterised
at one time. To provide several panels
with the same functionality
(generation of a duplicate of a
previously configured panel), please
proceed as follows:
Retrieve the function “Save as...” from
the File menu. The project is stored
with the file ending *.rcp. Now close
the panel software. Please insert a
new panel in ETS or Power-Project.
This can be in the same or another
project. Then open the panel software
for the inserted panel. Select the
function “Open” in the File menu and
select the previously saved file.
Please note that you can load the
data of a LEANtouch panel into a
SMARTtouch panel but not vice versa.
During the import, the following window
is displayed in which you can select
whether the import should be carried
out with or without group addresses.
During an import with group addresses,
you must ensure that all the group
addresses or actions are already loca-
ted in the project with identical EIS ty-
pes to the template. Otherwise, you can
only import the data without group
addresses. You must then however link
them again.
Auto backup file
When you retrieve the menu item
“Settings” under the File menu, you
can set the period, after which the
panel software will carry out an
automatic backup. This is a temporary
file which is stored on your hard disk.
If e.g. your computer crashes, you can
retrieve the last automatic backup
with the menu item “Reset” under the
File menu.
Copying functions
To shorten the configuration time, it is
possible to copy the settings of a
function (touch surface, time function,
lightscene). To do so, click on the
function with the right mouse button
which should be copied.
Note:
Only touch surfaces with identical appli-
cations or functions can be duplicated.
Functions of the panel software
