manualshive.com logo in svg

ABB LEANtouch 6x36/30M-500 Series, Product Manual

Share
Download
ABB LEANtouch 6x36/30M-500 Series Product Manual Download Page 42

42

January 2005

ABB i-bus

®

 EIB

ABB Powernet EIB

LEANtouch (monochrome),
SMARTtouch (monochrome, colour)
Type: 6x36/30M(-500), 6x36/100x(-500), 6x36/100CB

If a 1-bit function is set, it is possible
to switch either OFF/UP or ON/DOWN.
If a 1-byte function is set, a value
between 0 and 255 or a percentage
value of 0% to 100% can be sent. The
room thermostat function makes it
possible to change to the comfort,
standby or night operating mode of
the room thermostat.

In addition, the astro functionality can
be activated for each channel.
Blocking times can also be set such
as “not before 05:00” or “not after
22:00”. The automatic adjustment of
the astro programs are restricted due
to the position of the sun which
changes daily. For example, a shutter
would never be lowered later than
22:00, even if a further connection
would be necessary according to the
ASTRO calender.

Diagram for setting the switching
times directly on the panel, if this
option is enabled

In addition, there is the possibility of
integrating each channel in the
holiday functionality (see also
“Holiday”)

Summary of Contents for LEANtouch 6x36/30M-500 Series












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands