30
KM26 |
MAGNETIC LEVEL GAUGE | OI/KM26-EN REV I
ABB can provide custom fit insulation for most installations.
Contact the factory for details. Each KM26 is built to the
customer’s specifications, which makes parts for these units
unique. Each unit is given a serial number to provide ABB a
means to track exactly how the unit was constructed. To
order parts, specify the KM26’s serial number and the part
number suffix shown on the drawings that follow.
Note
Refer to parts drawing on page 25-26 for the part number.
Example: To order a scale for the KM26 show:
(Part number = serial # - 1C)
Part # 0510-9999-01-1C
Note
Floats are subject to change with customer requirements and
only the last float provided is the float of record (previous
versions are voided). Changes to float requirements when
ordered then become the float of record. These changes in
float design may also require the customer to adjust the float
stop springs to account for changes in float length and
magnet position. Estimates of the necessary changes can be
provided at quotation and final dimensions will be provided
once the final float design is confirmed by applications
engineering.
7 MLG parts ordering
8 Customer specific product information
Use this area to record pertinent information about your purchased unit.
Serial number __________________________________________________________________________________________________________
Process fluid____________________________________________________________________________________________________________
Process temperature _____________________________________________________________________________________________________
Process pressure ________________________________________________________________________________________________________
Fluid specific gravity (SG) _________________________________________________________________________________________________
Tag # ___________________________________________________________________________________________________________________
9 Certificate and EU declaration of conformity
These certificates can be downloaded via the following links / QR codes or by searching for their titles
(enclosed in " ") on the website (www.abb.com):
E . 1 EU declaration of conformity - ATEX constructional safety certificate
EU declaration of conformity | ATEX 2014/34/EU | PED 2014/68/EU
E . 2 EU-type examination certificate
EU-type examination certificate | ATEX 2014/34/EU
